Lulzbot Taz 6 13mm Bed Levelling Spacer Upgrade; Improved Wire Clearance, Proper Fit for Optional Modular Bed, Improved Levelling

thingiverse

To address your concerns about the Taz Pro bed design, you'll need to purchase some hardware parts and print a few custom components. Here's what you'll need: 1. 13mm Stainless Steel Spacers (4): These are similar to the 10mm spacers that come with the Taz 6, but they're 3mm taller. 2. M3x14mm Button Head Cap Screws (8): You'll use these for the Ninjaflex Bed Corners. 3. M3x18mm Flat Head Cap Screws (4): These are for the Levelling Washers. 4. Optional: M3x10mm Flat Head Cap Screw (1) To print the custom components, you'll need to use Ninjaflex TPE with the following settings: * Layer Height: 0.30mm * Infill Density: 60% * Infill Pattern: Zigzag You'll also need to print a new Z-min switch holder and a new Wiper Pad Mount (or Dual Wiper Pad mount if you have the dually) in ABS. Once you've got all the parts, follow these steps to install the upgrade: 1. Remove the old bed and unscrew the bed corners. 2. Keep the black washers and stainless "pad" washers, and replace with the new hardware (using the old washers). 3. Replace the Z-min switch holder and wiper pads. 4. If you want to provide support for the modular heater, install a new spacer with a Flat Head Cap Screw making sure the screwhead is countersunk to the rubber surface. Reinstall the glass, check the fit, home your printer, and be cautious on your first print as it may change your Z-offset.