LTT Screwdriver holder for pegboard

thingiverse

Needed a place to store my LTT screwdriver, and I recently put up a pegboard, for some of the tools I daily drive. So I made a holder for the screwdriver. It works very well, and I will be adding newer versions when I change something. All the versions will work, but they will have minor changes from the previous version, as they progress. I will put the newest version at the top. But they will have some constants. So far all versions have a 45mmx45mmx28mm (LxWxH) body, and 3.6mm countersunk screw holes for mounting. Version 3: No support needed! The second version of my LTT screwdriver holder. Faster printing time, nearly cut in half. Less material waste. No supports are needed, just print in place. Version 2: As intended. The second version of my LTT screwdriver holder. This is how I first imagined the holder when I first started. I just included the first design, because maybe someone will like it better. I like this design a lot, but I would like a quicker, easier version, with even less material use. The hole in the middle is 29 mm. (Print with support) Version 1: The Basic. The first version of my LTT screwdriver holder. It works great. In this version, the screwdriver will just sit on the hole, but it sits nice and firm. The hole in the middle is 28 mm. (Print with support) The support settings I use. (Will skip some) Support structure: Tree Tree Support Branch Angle: 45 Tree Support Branch Distance: 1mm Tree Support Branch Diameter: 2mm Tree Support Branch Diameter Angle: 7 Tree Support Collision Resolution: 0.28mm Support Placement: Everywhere Support Overhang Angle: 55 Support Pattern: Zig Zag Support Wall Line Count: 1 Connect Support Zig Zag: Yes Support Density: 10% Support Line Distance 4mm Initial Layer Support Line Distance: 4mm Enable Support Brim: Yes Support Brim Width: 5mm Support Z Distance: 0.28mm Support Top Distance: 0.48mm Support Bottom Distance: 0.28mm Support X/Y Distance 0.8mm Enable Support Interface: Yes Support Interface Thickness: 0.8mm Support Interface Resolution: 0.28mm Support Interface Density: 80% Support Interface Pattern: Concentric