LTT Driver Case - Gridfinity 1x6

thingiverse

<h2>About this Model:</h2> <b>Features:</b> <ul> <li>Modified to be 1x6 without overhang.</li> <li>Uses 3x3 Neodymium magnets to affix a top, however I have not created this yet.</li> <li>Designed to be modular and allow an additional 38x105mm insert to be added within the case.</li> <li>Driver insert is held in place by a peg built into the case, however it can also be glued in.</li> <li>Case can be printed on a Ender 3 bed if angled 45° without a skirt. Sectioned up version to come for smaller beds.</li> </ul> <b>Notes:</b> <ul> <li>With the settings I use the case uses ~55g of filament and ~25g for the insert.</li> <li>The case prints well, however I am still working out issues with the insert at time of writing.</li> </ul> <h2>Sources:</h2> <ul> <li>Remix of <a href="https://www.thingiverse.com/thing:5733106">BonzNumber123's LLT case.</a></li> <li>I used <a href="https://www.printables.com/model/275757-gridfinity-base-template-with-improved-holes-and-w">Serpent10i's Gridfinity Base Template from Printables </a>for the Gridfinity Base</li> </ul> <h2>Change Log:</h2> <b>Insert v2:</b> <ul> <li>Driver did not properly seat in v1 insert, I have made the handle portion deeper in order to try to fix this as well with a smoother transition.</li> <li>Driver is a bit loose in the case with this change, however it does now properly fit, I may make a version with a tighter fit in the future as an option.</li> <li>Expanded hole in bottom to better deal with tolerance issues with peg in case.</li> </ul> <b>Case v2:</b> <ul> <li>Smoothed corners</li> </ul>