Lower dash vents for Land Rover Series III

prusaprinters

<p>This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.</p> <p>But with the magic of 3D Printing you can just print your own.</p> <h3>Print instructions</h3><p>Unassociated tags: Series ii, Series III</p> <h3>Category: Automotive Summary</h3> <p>This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.</p> <p>But with the magic of 3D Printing you can just print your own.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong> OrdBot Hadron</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Print in ABS or ASA as PLA wont survive inside a vehicle.</p> <p>Designed to be printed face down without supports.</p> <h3> How I Designed This</h3> <p>Designed in Fusion360 of a template photo and some measurements.</p> <p>Special thanks go out to the "3D Printing Australia" group for kicking my brains 3d dimension back into gear</p>