Lower Corner Hinge Plugs (for Prusa Enclosure V2)

prusaprinters

<p>When assembling the V2 enclosure (<a href="https://blog.prusaprinters.org/mmu2s-printer-enclosure/">https://blog.prusaprinters.org/mmu2s-printer-enclosure/</a>), I noticed, as did others, the M3x30mm screws would not thread into the the corner bottom front pieces. They're listed as:</p> <ul> <li>Prusa_MMU_enclosure_corner_bottom_front_left</li> <li>Prusa_MMU_enclosure_corner_bottom_front_right</li> </ul> <p>If a plug is inserted on top of the M3x30mm socket head, the screw will be pushed completely into the part (thereby holding / stabilizing the hinge). Additionally, since this plug is flush with the bottom of the main corner pieces, it will be held in place when screwed to the Lack table.</p> <h3>Print instructions</h3><p><strong>Note</strong>: If the plugs are not flush, ensure that the hole is completely clear of support material such that the M3x30mm socket head is sitting completely inside.</p>