Low profile shock absorbing feet for 2020 V-slot (single) profile (remix)

prusaprinters

<p>This remix makes the feet a little stiffer, and rotates 90 degrees in relation to the aluminum extrusion.<br/> Finally I made the horizontal sections solid for added strength.</p> <p>The original snaps on the inner side of both 2020 profiles, for a single, that is not possible.</p> <p>This is a remix of the original feet, as well as my own PLA-related strength enhancements.</p> <p>Two variants:</p> <ol> <li>Snap-in.<br/> These should snap in the extrusion and stay there until forced out. If they don't fit your profile, let me know.</li> </ol> <ol> <li>Slide-in.<br/> The preferred method; these fit perfectly, but you need an open end and unobstructed path to the position you want the feet in. Most likely, end-caps, bolts and other stuff is in the way :)<h3>Print Settings</h3> </li> </ol> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>.12</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>80%</p></div><br/> <strong>Filament:</strong><br/> Creality3D PLA White <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>(printed with the spool PLA that came with the Ender-5, assuming they shipped their own brand)</p> Infill as high as you like, there is not much to fill in, but to be sure, at least 75%.</div></p> <p>Supports are needed to prevent the snap-in portion to sag.</p> </p></p></p> Category: 3D Printer Parts