Low_Poly Penis
thingiverse
Modeled after my actual measurements, this was designed as a positive for creating a mold for making a toy when my partner is away. I'm not going to sugarcoat it here - there's a lot of work left to be done on this model. When printed out, it will be highly faceted, and there's really only the general shape and dimensions. The positive will only be as good as you make it with creative work after the printing is done. Steps I used to get to the point you see in the photo: 1) Created, cut, and printed the model pieces. 2) Filed and dry-fitted pieces using alignment pins. 3) Glued the pieces together (starting with the bottom half, then the top halves, and finally putting them together). 4) A lot of sanding, filing, and getting all the facets smoothed out. 5) Coated the entire thing in wood filler putty. 6) Smoothed out the wood filler by wearing nitrile gloves, wetting them, and rubbing over the entire surface. 7) Added veins with a small hobby hot-glue gun and repeated the steps above, blending them into the rest of the model with wood filler putty and more glove action. 8) Put in a few very thin coats of latex paint to seal things a bit. 9) Smoothed out the air bubbles left by painting (used a brush). 10) Completely sealed the mold with 10 very light coats of hard spray paint - I say hard because matte and dull finish paints tend to flake and chip easily, whereas gloss paint, applied in thin layers, seems much stronger. 11) Wet-sanded the entire thing to get a glossy smooth finish everywhere and applied two more very thin layers of the same gloss spray paint. Notes: In hindsight, I would recommend using auto-body filler instead of wood putty, skipping the latex paint part (it was more trouble than it was worth), and wet-sanding the entire pieces after every two thin coats of gloss spray paint to keep everything smooth and uniform. Judging by the photos, you can see what a bit of work and creative thinking can get you. As always, I hope you guys enjoy the design. If you want to tip me, please do so - I kind of have a habit to support that's pretty funny.
With this file you will be able to print Low_Poly Penis with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Low_Poly Penis.