Low-poly Ninja Turtle knife holder

prusaprinters

<p>This is a remix and enhancement to an original low-poly ninja turtle:</p><p><a href="https://www.thingiverse.com/thing:3286249/files">https://www.thingiverse.com/thing:3286249/files</a></p><p>I've added a sword sheathe, “straps” to hold it, and a sewer lid/sidewalk base. There are also some slight additions to allow the fists to print without supports. I used tinkercad to alter the original, so if you open the .stl file, fair warning, it's ugly.&nbsp;</p><p>The pictures are straight off the printer after removing the support material. For the true Leonardo experience, you print in green PLA and put a touch of blue paint on the elbow/knee pads and bandana.&nbsp;</p><p>I've also includes a “Torso" file which includes the most difficult printing segment, so you can experiment with your own settings if you like, without having to dedicate 7 hours to getting to that point.&nbsp;</p><p>Prints well in PLA, .15mm “detail” setting in prusaslicer.&nbsp;</p><p>The attached gcode uses some supports under the crotch and shell. I also used variable layer height to make the base layers a bit thicker to shave off some print time.</p><p>Fits knives with up to 100mm blade length, blade width up to 28mm, blade thickness appx 2.25mm.&nbsp;</p>