LOW COST VASE MODE PLANTERS / POTS Stackable

thingiverse

Download it on Cults3d, only free for a few time! https://cults3d.com/en/3d-model/home/mic-macetas-modo-vase-de-bajo-coste (I'm sorry, I don't upload more designs to thingiverse, there is no support, they have left aside the app, the web and the platform in general.) Growing pots designed for quick printing and to reduce cost as much as possible. Stackable, they fit one inside the other taking up little space. Printed in vase mode they do not need much plastic and are resistant even with 0.4 nozzles. I have designed several sizes, all with 3mm drainage holes. You can scale the pot in cure and adjust it to the size you like, it will change the size of the holes but it is not relevant. Remember to print in vase mode, or spiralize outside contour in cure. You need to adjust the number of initial underlayers. By adjusting the initial under layers you can adjust the thickness that the base of your pot will finally have, depending on your printer, you will need more or less layers to get the thinnest possible but resistant base. The pots have supports to facilitate drainage, in cure you can avoid printing them by lowering the pot until the supports are below the printing base. I will upload the same model with different exterior textures soon! PLEASE! comment your experience printing it, if you need other sizes, or have suggestions feel free to comment! If you liked the model a like is much appreciated, and much more a make! Last but not least. Thank you so much for downloading and printing my designs! 3D PRINTING SETTINGS Print in vase mode. In cure, use the spiralize outline option (select the number of lower layers to spiralize only the upper part). I printed it with 0.4 head, they are tough, somewhat flexible. It needs support, you can lower the part in cure and hide the drain brackets, you won't need print supports but it won't drain water as well. Please comment on your experience printing it.