Louvered Dryer for Boxing Glove

prusaprinters

<p>This is an insert for a boxing glove, designed to make it stay open wider when not in use so that the sweat inside it can dry up. I use it for my Krav Maga gloves. Its dimensions are identical to Isaac Howard's dryer, but mine is ventilated with louvers instead of a lattice. This design has less surface area in contact with the glove, which may reduce trapped sweat.</p><h3>Suggested Setup</h3><ul><li>Bottom layers: 0</li><li>Top layers: 0</li><li>Infill: 0%</li><li>Extrusion width: 120% of nozzle diameter¹</li><li>Perimeters: Just enough for walls at least 2.4mm thick²</li><li>External perimeters first³</li><li>Brim: 5mm⁴</li><li>Layer height: 50% of nozzle diameter¹</li><li>Seam alignment: Nearest</li><li>Supports: None</li></ul><h3>Notes</h3><ol><li>Larger extrusions tend to produce saggy bridges.</li><li>Thinner walls would weaken the adhesion between segments, which are attached only at their four corners.</li><li>Printing internal perimeters first may produce saggy internal overhangs.</li><li>Without a brim, the first layer may not adhere well to the bed.</li></ol>