Lotus Elise Exige Haltech IC7 Dash adapter
thingiverse
Made an adapter to put a haltech IC7 dash onto the lotus elise/exige factory bracket. Mine is a 2005 S2 toyota base Elise for reference. Printed in ABS with 6 line walls and 20% infill, printed upright with "tree" support in the middle bridge.Reuses the lower two screw locations to get centered, drill a couple holes for rivets. (I used 3/16 x 3/4)Drill holes for the slightly wider location of the IC7 screws (use the holes in bracket to guide the drill bit once riveted together)Then just some minor trimming of the lotus bracket to clearance for the communication cable, and around the upper screws.If I recall I used M5 x 20mm screws.
With this file you will be able to print Lotus Elise Exige Haltech IC7 Dash adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lotus Elise Exige Haltech IC7 Dash adapter.