Lotmaxx SC-10 Shark touch controller front holder V2 - Articulated

prusaprinters

This is a redesign of my previous model. Now the model angle can be articulated/adjusted. I redesigned also to fit into the original holder (the cuts on the sides are designed to fit into the old holder => can be seen on the 4th image) I did this front controller holder, because I usually print when I'm working. I wanted to see from the other side of the room the print status or when the printer got an error without having to stand up from my desk. The model clips onto the Lotmaxx logo part on the front of the printer or the original holder. Print Settings Printer: Lotmaxx SC-10 Shark Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: Sunlu PLA Black Notes: I printed this for testing purposes in Sunlu black PLA at nozzle temperature of 200 degrees (C) and bed temperature of 50 degrees (C). Supports are needed for this print. Post-Printing ============= Leg Slipping RESOLVED I encountered some structural flaws (it broke at the cutout for the original holder), so I jumped into Tinkercad and resolved that issue. Also made the teeth for the articulating leg bigger (and the articulating leg too). Now it supports its weight without slipping. I changed the wrong model file into the improved one. The leg is slipping - OLD _******__****OLD DESIGN FLAW******____******** The leg to adjust the angle is slipping. May be a support problem or the resolution. I wanted to print it fast. After many attemts and failed designs this is the best working. If the leg is slipping, rubber band can be used to hold the supporting leg in place. How I Designed This Designed in Tinkercad This model was designed in Tinkercad. Feel free to copy/modify it using this link: https://www.tinkercad.com/things/jENS8eqwN36 Category: 3D Printer Accessories