Lord Of Darkness Lithophane

thingiverse

Film: Legend Character: Darkness (Lord of Darkness) Time to print: 19 hours Minimum/Maximum Layers: 0.6 - 2.8 Layers: 1.2 mm Speed: 45 mm/sec Tools: Printer: Ender 5 Filament: #Esun Cool White PLA+ Lithophane Profile courtesy of Mark Gonsowski: https://www.gameon3d.com/downloads-links Lithophane Helper: https://www.thingiverse.com/thing:2718124 Slicer: Cura 4.4.1 Image Source: Bing Image Search Photoshop for image sizing and color work Lithophane Creator: https://tool.itslitho.com/#/CreateModel Settings: In photos I make all my Lithophanes to fit custom frames. Dimensions are 126.5mm x 177mm Important note: Do not resize lithophanes in your slicer! If you want a different size, it's best to resize the B&W image and create a new STL at lithophanemaker.com or https://tool.itslitho.com Use the same settings as I did, just tweaking for size Different filaments have different transparency. These settings worked well with Esun Cool White PLA+ Minimum 0.6 Maximum 2.8 This one was created using itslitho.com Settings are in the pictures I used Mark Gonsowski's Lithophane Profile It is included in this download package The only things you may need to change are Retraction settings and sprint speed I also changed to 1.2mm layers vs 1.0 Cura 4.4.1 Printed on my Ender 5 with .4 nozzle, 1.2 layers Filament is Esun Cool White PLA+ My Print time was 19 hours @ 45 mm/sec I mounted mine in a custom lithophane box and lit using a LED Flame Bulb Information from Mark about his lithophane profile Taken from https://www.gameon3d.com/downloads-links If you're using both my night light profile and Thomas Brooks Lithophanemaker to generate a night light STL, you'll need to add bottom layers only if you increase the "adapter thickness" to a value greater than the default value of 1.8 mm. Some other Cura settings you may need to change depending on what filament you're using and printer setup/calibration would be your temps, retraction speed/distance, and flow.