LoRaWAN GPS Tracker Enclosure

thingiverse

This is a basic housing for DIY LoraWAN GPS Tracker, based on ATMega328P microcontroller, Quectel L80-R ultracompact GPS module featuring an embedded patch antenna, and Hoperf RFM95W LoRa long range communication module. The PCB is powered by a single 3.2V AA sized LiFePO4 rechargeable battery.\r\n\r\nAll components of the GPS tracker are mounted on the back side of the PCB, except for the battery, which is mounted on the front side of the board.\r\n\r\nThe housing consists of two parts, top and bottom case. The PCB with all components side is installed on the bottom case and secured with a single M2.5 screw. In this way the battery remains on the top side of the PCB, making its replacement easier when needed.\r\n\r\nThe top case covers the PCB with all components of the GPS tracker, along with the battery.\r\n\r\nThere is a small hole on the top side of the housing where the LoRaWAN antenna can be connected.\r\n\r\nThe housing can be printed with standard PLA at layer height 0.2mm and layer width of 0.48mm (standard for 0.4mm nozzle).