LoRa Microchip_RN2483_LoRa_Mote enclosure

thingiverse

Enclosure for Microchip RN2483_LoRa_Mote. Top_GPIO.stl part has slots for the GPIO pins. Use 2Button_GPIO.stl instead. Print Top.stl, the closed part without exposing the GPIO pins. Use 2Buttons.stl as an alternative. Print buttons on Layer High at .10mm thickness. Flip the top part upside down to achieve a smooth surface and print it without supports. Place two buttons in position and seal them by melting the top of the pins with a nail. Securely attach the top to the bottom. Printer Settings: MakerGear is the printer brand used. M2 is the printer model employed. Rafts are not enabled for this print job. Supports are also disabled for optimal results. A resolution of .20mm is maintained throughout the printing process.