Looney Tunes Logo

cults3d

Looney Tunes Logo, the logo for the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. The logo for the Looney Tunes cartoons has changed considerably over the years, as well as at times incorporating characters directly into the logo. I chose what I felt was the most iconic version of the logo for this model. To achieve the depth effect of the logo, the model has the letters overlapping each other, and the rings vary in depth. No supports are required. If you have the proper filament colors, no painting is needed. The assembled model is 130mm in diameter and 10mm thick. Enjoy! ........................................................................................................... Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback. Another shoutout to the guys at 3DBoom (Thingiverse id: 3db00m) for printing a final proof copy of this model. A picture of the front view of their print is included. See their build under their full make for more details. ........................................................................................................... Print Instructions: Supports: No Resolution: .2mm Infill: 10% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... Building the model Colors Black: (Paramount3D PLA - Black) ring4 base (optional part) .. Dark Red: (Paramount3D PLA - Iron Red) ring3 .. Red: (Hatchbox PLA - True Red) ring2 .. Light Red: (Paramount3D PLA - Volcano Orange) ring1 .. Black: (Paramount3D PLA - Matte Black) (first color with color change at height 4.2mm for white, all the letters can be done together) L O Oa N E Y T U Na Ea S .. White: (Overture PLA - White) (second color for color change at height 4.2mm on top of the black, all the letters can be done together) L O Oa N E Y T U Na Ea S .. ........................................................................................................... Printing and assembly tips Printing tips 1 - No supports are required. 2 - I did not usebrims or rafts on any parts 3 - The letters are to be printed with a color change at or above 4.2mm. Black first, then white. Be sure to check your slicer to confirm the color change occurs only for the top layers. 4 - An optional base is included for displaying the logo standing up. .. Assembly tips: 1 - I used E6000 to glue this model together. The longer drying time gave me the ability to ensure the parts are positioned correctly. 2 - The rings do not have any 'guides' for positioning. Use the diagram and turn the rings so they line up. Dry fit the letters to ensure everything is lined up before gluing. 3 - Important - In order to get a good 3-D effect, the letters overlap each other. Therefore when putting the letters in, start on the right and work your way to the left. 4 - The optional base is purposely a tight fit and does not need to be glued. Do not hesitate to ask questions, feedback is essential to making better models.