Longrunner LC26 Raspberry Pi Camera Mount

prusaprinters

<p>This is a camera mount for use with the Longrunner LC26 style Raspberry Pi cameras that have IR illumination and cut filter. It is designed to be mounted on Creality Ender 3 style printers with 2040 or 4040 aluminum extrusions.</p><h4>Materials</h4><ul><li>Camera</li><li>FFC Pi camera cable (at least 30cm/1ft recommended)</li><li>1 print of each model</li><li>4 each M3 x 16 screws for camera housing (frontplate, backplate, &amp; rearplate)</li><li>1 each M3 x 16 screw and M3 nut to mount camera housing to column</li><li>4 each M4 t-nuts &amp; M4 x 10 screws to mount base to printer rail</li></ul><h4>Assembly</h4><ol><li>Mount camera in housing pieces using M3 x 16 screws. The screws will cut threads as they are installed.</li><li>Mount camera assembly to the column using the M3 x 16 screw and M3 nut. The holes in the column ears and the rear mounting plate may need to be enlarged to clear the screw threads.</li><li>Slide FFC clip onto column.</li><li>Using the lower screw clamp the column to the base.</li><li>Attach base to printer using M4 x 10 screws and M4 t-nuts.</li><li>Thread Raspberry Pi camera FFC cable through slot in base and FFC clip. Attach to camera and attach other end to Raspberry Pi.</li><li>&nbsp;Orient camera by loosening screw and nut at rear mounting plate and loosening lower screw. Retighten once desired camera view found.</li><li>Enjoy your printer!</li></ol><h4>Attribution</h4><p>This is a remix of <a href="https://www.thingiverse.com/thing:4514531">https://www.thingiverse.com/thing:4514531</a> by <a href="https://www.thingiverse.com/3dpmarkr">3dpmarkr</a>.</p><p>&nbsp;</p>