Logitech Shifters Upgrade + Sparco Knob

cults3d

Modification for all Logitech shifters. It gives much more hardness and feel to the H-shift. Using only 4 screws, 2 springs and some printed parts. The springs allow a much firmer and more precise self-centering. The assembly also reduces backlash and dead zone. It includes two types of upper plate. One alternative in 2 parts to make in carbon or other colors and customize easier. It also allows to customize the different parts with different logos and colors. Includes some logos like OMP, Logitech, WRC...if you need a different one, just ask me! Send me a message with your logo and I'll re-upload it. Also includes a 42mm diameter Sparco knob for a limited time. Only the bottom piece for the base of the screws and the knob needs printing brackets. Needed. 2x 8x40mm springs 4x M4x20mm countersunk head screws 4x M4 nuts Some sandpaper A little plastic or silicone grease It is only advisable to sand the ball or ball joint and slider to make them move smoothly, depending on tolerances and print quality. The ball joint is inserted into the slider laterally and then rotated. It must be very tight. The hardness can be manipulated by varying the fill density of the slider at impression time: 2 perimeters and 10% infill is soft-medium touch. 3 perimeters and 40% infill is hard-touch The feel also varies depending on the material used in the printing. Added top plate with original button shape for g25 and g27!