Logitech Racing Wheel Shifter Magnets

prusaprinters

<p>Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels.</p> <p><strong>Files:</strong><br/> Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.</p> <p>Logitech Shifter Magnets Thicker Nut: Same as standard version, but can fit a thicker 2.5mm M3 square nut.</p> <p><strong>Required Hardware:</strong><br/> (4) 8 x 3mm disk magnets<br/> (2) M3 x 10mm socket cap head screws<br/> (2) M3 square nuts - 1.8mm or 2.5mm thickness</p> <p><strong>Installation Instructions:</strong></p> <ol> <li>Use super glue to attach the magnets to the printed pieces. Insert the magnets so that they all have the same polarity direction. Wait for the glue to dry.</li> <li>Insert the square nuts into the slots.</li> <li>Place the pieces around the steering wheel column. Insert one screw and tighten slightly.</li> <li>Insert the other screw and tighten slightly.</li> <li>Alternate tightening each screw until both are evenly tight.</li> </ol>