Logitech G29 F1 Style Wheel (Easy Print)
thingiverse
Easy to print F1 style wheel. Goes together with glue/epoxy, or if you want the ability to change handles you can use Qty 4 M3x14 screws, Qty 4 M3 nuts, and Qty 8 M3 washers. This design was tested on a G29, but likely fits on G27/G920. Please search for instructions on removing the stock wheel, then this wheel simply attaches using the 6x center screws. I have included two button plungers to reach down and touch the stock switches. You will need 2x of each plunger length. Recommend printing with at least 35% infill for acceptable stiffness. Only use support material in the screw holes on the front face. Assemble the two-piece handles with super glue or epoxy. Do not over-tighten the 6x G29 hub screws.
With this file you will be able to print Logitech G29 F1 Style Wheel (Easy Print) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Logitech G29 F1 Style Wheel (Easy Print).