Logitech G Pro X Headset - Desk Holder

prusaprinters

<h3>Headphone holder for Logitech G Pro X</h3><p><br>I was just getting sick of placing my new headphones on the desk so I made this headset holder specifically for Logitech G Pro X.</p><p>This headset comes with an external USB "sound card". Since I want to place holder on the opposite side of my desk, then my PC is, I am running an USB extension cable to the sound card. This is why I intercorporated the sound card mount to the holder. This way it is kept nicely under the desk and I can use the full length of the headset cable, plus it is easy to disconnect in case I want to take the headset on the go.</p><p>On top of the holder there is also a little clamp to store your detachable microphone for the times you don't use it.</p><p>I made it specifically for my desk, but it should fit any desk if you are ok with attaching the holder directly to the side of the desk. The flat side with holes is 30mm high. I am using M5 carriage bolts to mount it to the metal bar underneath the desk, but I also made a countersank round hole, 5.2mm diameter for use with wood screws.</p><p>I printed this with PETG for additional strength, but PLA should be fine. It doesn't need any supports when printed on its flat side.</p><h3>Versions</h3><p>holder_v2_square.stl - square hole for M5 carriage bolt<br>holder_v2_round.stl - 5.2mm round hole for wood screw</p><p><strong>If you like this, please consider giving it a like and posting your make.</strong></p><p><strong>Print Settings</strong></p><p><strong>Printer: </strong>Ender 3 Pro</p><p><strong>Rafts:</strong> No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>0.24mm</p><p><strong>Infill: </strong>50%</p><p><strong>Filament: </strong>Plasty Mladec - PETG&nbsp;</p><p>&nbsp;</p>