Logging Trailer

thingiverse

Parts required to 3d print and scratch build your own Logging Trailer. Suits 1/14 scale Tamiya & Hercules Hobby RC Trucks. All parts were printed in PLA Plus from 3D Fillies. Aluminium rails were also scratch built from a 6.5m length of mill finish aluminium extrusion 40mm x 20mm x 1.6mm unequal angle. In Australia this is available from Capral Aluminium. Aluminium is docked at 1000mm, then using Tamiya/Hercules Hobby trailer rails, are then profiled to the same shapes, front & rear. (You can of course make them any length you wish) 3d print "Air Bag suspension" type files are included. As is, a rear light set. (LED buckets & fitting brackets, and lenses) There is also a Side Clearance Light holder too. It holds a 5 x 2mm LED. (Yellow ones are available from Jaycar in Australia.) Both length trailer axle tubes are included; 120mm and 140mm too. Just choose whichever width plastic tube that you want on your trailer. Metal parts are identical internally. Extra parts required to finish trailer; King pin and plate. C2 & C5 Tamiya trailer parts (to fit plate above) Internal metal parts of axles. Rims & tyres to suit axle size. Assorted hardware.