Logetar 135mm f/2.2 lens mount and apertures
prusaprinters
<p>As explained <a href="https://www.dpreview.com/forums/post/65760603">in an article I posted at DPReview's adapted lens forum</a>, the Logetronic 135mm f/2.2 Logetar is a pretty strange lens... but it is fast and covers a quite large image area at infinity focus.</p> <p>This thing consists of a standard 4x4" mounting board modified for mounting this lens and a set of Waterhouse stops that fit the slot in the lens body.</p> <h3>Post-Printing</h3> <p>Mounting the lens in the 4x4" board is a little problematic because there is no thread for a retaining ring. Instead, I recommend pushing the lens through the board, making sure it seats properly at the slight lip in the lens barrel, then lock it into position with some hot glue or other glue.</p> Category: Camera
With this file you will be able to print Logetar 135mm f/2.2 lens mount and apertures with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Logetar 135mm f/2.2 lens mount and apertures.