Locking Unit Tray (Inline)
cults3d
Locking Unit Tray (Inline 3/5) MK6 For Warhammer 40k and other 28mm wargames Summary Combine 3 or 5 models into a single unit with this Unit tray. Add the Base to lock the units into the Unit Tray for display and transport. This design is explicitly designed to match 32mm, and 40mm CITADEL brand bases. The Bases can be used as replacement bases for your models if you wish. Use the Tool as a wrench to clamp down the Bases. This is an upgrade from the previous version. You can slide the Bases on and off the tray without complete detaching them from each other, and the slide-in/slide-out shape of the Tray makes packing and unpacking your models faster than ever. Hardware The bottom Base requires and M3x8 or longer bolt. The top Base requires an M3 nut. You can source metric bolts from your local hardware store. Assembly Print the tray and two "bases". You will need an M3 hex cap bolt and nut. The nut goes into one base, and the bolt through the other (super glue keeps the bolt from spinning). This will allow you to bolt the two bases together like a sandwich. It will be an hour-glass shape looking at it from the side. Slide the bases into the tray, then clamp the bases onto the end of the tray where the slot is. This will lock in the models and they will not be able to fall out. You can also punch the bolt threads through another surface (like a box or carrying tray) to lock them to it.
With this file you will be able to print Locking Unit Tray (Inline) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Locking Unit Tray (Inline).