LM Tech Pi Camera Mount for CR10 MAX
thingiverse
Rapsberry Camera mount for CR10 MAX frame support. (or any other round bar cca 16-20mm DIA. Designed for 18mm) You will need only 2off M4x20-25mm screws. Choose where you want the cable (left or right) and print camera case as desired. Then print one of each and 2x16mm Ball joint 5mm square. The joint arms are to be printed in pair (as per Gcode) then glued back to back. That way make it as long as u like. The ball-square to be glued in to camera pod, the mount bit is tight no need to glue. Holes in bottom part are 3.2mm so they can be tapped to M4 if required. (but unless you print steel you should be O.K. without tapping. :) Designed to hold nice and stiff (DO NOT SCALE or the joints may not fit).
With this file you will be able to print LM Tech Pi Camera Mount for CR10 MAX with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on LM Tech Pi Camera Mount for CR10 MAX.