Llama! (Multi-Extruder Remix)

prusaprinters

<p>This is a remix of <em>DigitalMeetsWorld's</em> <em>Llama</em> that has been cut into separate pieces for multi-extruder printing.</p> <p><strong>Please be aware that this remix was not designed to be printed in pieces on a single-extruder machine and assembled afterwards.</strong> Use DigitalMeetsWorld's original model to get everything at once in a single colour.</p> <h3>Print instructions</h3><p>The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU as follows:</p> <ul> <li><strong>llama_body.stl</strong> <em>Monoprice brown PLA (extruder 1)</em></li> <li><strong>llama_patches.stl</strong> <em>MG Chemicals gold PLA (extruder 2)</em> </li> <li><strong>llama_eyes_white.stl</strong> <em>Prusa white PLA (extruder 3)</em></li> <li><strong>llama_eyes_black.stl</strong> <em>MG Chemicals black PLA (extruder 4)</em></li> </ul> <p>I printed my llama scaled down to 75%, which measures roughly 60mm x 128mm x 123mm. If you're going to scale it down more than that, pay close attention to your slicer settings and preview before printing - the details in the area around the eyes, and between the snout and eye patches can get sketchy if you go too small.</p> <p>Happy printing!</p>