Littlebits Filter Eurorack Faceplate
prusaprinters
<p>The LittleBits Synth Filter is basically a Korg MS20 filter. I was about to build my own MS20 Eurorack filter based on one of the many designs online, but then I remembered I already had a Korg MS20 filter in my LittleBits kit. I soldered directly to the +5v input, ground, signal in, signal out, and CV control in, connected the in/out/control to three 3.5mm jacks, wired up a Eurorack power connector to get the +5v and ground, put an LED inline with the power with a 330ohm resistor, soldered it all to a breadboard, wire tied the filter to the breadboard, and called it a Eurorack 1U filter panel. It works great. If you buy the filter from the LittleBits website it's only $17. I would have definitely spent more than $17 just on the opamps, LM13700, caps, and transistors.</p> Category: Music
With this file you will be able to print Littlebits Filter Eurorack Faceplate with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Littlebits Filter Eurorack Faceplate.