Little Hands Spinner

thingiverse

I designed Fidget for little hands so my 7-year-old wouldn't struggle with it. The center bearing is just a regular 608, and the triple weight is 9.5mm ball bearings I found that PETG works best because both PLA and ABS started to crack when pressing in the 9.5mm ball bearings. When I pressed them into the PETG, it took the bearings without showing any signs of stretching or cracking. This is a customized version of http://www.thingiverse.com/thing:2038582. Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2038582 Print Settings: Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: No Resolution: .1 to make it look nice but up to .25 should work Infill: 100% Notes: I found PETG works best, PLA and ABS started to crack. Maybe you can get it to work with some tweaking, but I made three with PETG and each one works great. Instructions Using the following options: Notch_Depth = 75 Center_Bearing_Outer_Diameter = 22 Color_Insert_Surface_Ring_Height = 1 Cutout_Radius = 0 Outer_Hole_Type = 2 Center_Bearing_Inner_Bore_Diameter = 8 Edge_Profile = 0 Color_Insert_Extra_Height = .5 Display_Mode = 1 Node_Radius = 20 Bearing_Grip_Diameter = 0 Height = 7 Node_Count = 3 Part = Spinner Alt_Node_Diameter = 0 Color_Insert_Scaling = 90 Cutout_Rotation_Degrees = 0 Cutout_Width = 6 Bearing_Grip_Center_Hole = 2.7 Cutout_Orientation_Degrees = 0 Dual_Cutout_Separation_Degrees = 60 Bearing_Grip_Shoulder_Thickness = 1 Node_To_Notch_Ratio = 1 Bearing_Grip_Thickness = 1.7 Cutout_Multiplier = 0 Center_Bearing_Support_Ring_Width = 2 Cutout_Shape = 1 Cutout_Height = 6 Outer_Hole_Diameter = 9.5