Little Cat - a cartoon cat

thingiverse

My son started drawing his own comics last year. One of his creations is a stick figure character named Little Cat (LC). A few months ago he asked me to help him make a 3d printed Little Cat, so we sat together on a few sessions where worked on the design together. This is the result. All parts should be printable with no supports when printed at 0.12mm layer height. The head, body and feet are connected together using 1/4 inch galvanized conduit that I cut with a Dremel and secured with 2 part epoxy. The legs are 40mm and the neck is 55mm. The conduit was purchased from amazon and is PVC coated. I used a knife to cut the PVC layer and peel it away, and used just the metal conduit. The mouth eye and nose were painted with black acrylic paint using a 25ga blunt tip needle. https://www.amazon.com/gp/product/B07DX6J4V5/ Electriduct 1/4" PVC Coated Liquid-Tight Galvanized Steel Flexible Metal Conduit conduit dimensions ID 0.23" | OD 0.35" ID 6mm | OD 9mm There is a tiny 1mm hole in the back of the body that might need to be drilled to fit a pipe cleaner. The pipe cleaners that I used measured around 1mm in diameter so I didnt need to open the hole up any further.