Litophane lamp

thingiverse

Here's the rewritten text: **Updated 2018-12-18: Added Foot Model** This design is for a 4-litophane lamp. You can generate the litophanes using http://3dp.rocks/lithophane/ or any software (Cura works great). I use Cura to print my litophanes. Simply upload your JPG file and set the base thickness to 0.3mm, height to 2.7mm, and select "darker is higher." Print at a layer height of 0.1mm and 100% infill. Before printing, I usually preprocess my images (delete or soften the background, increase contrast, convert to B&W) and draw a 3mm black frame around the photo to create a thick border in the litophane. This results in a 90x90 picture with a 3mm frame, which translates to a 96x96mm litophane. For lighting, I use a 1w LED or a 50cm LED strip. Note: Avoid using anything that can get extremely hot. The base has a hole for the switch: http://www.ebay.es/itm/252518482179 The feet (pata_15x15) are glued to the base with superglue and a silicone adhesive dot is used to secure them in place.