Lithophane Stands

thingiverse

Update: A variety of stands for 3mm thick lithophanes have been added. Many more can be accessed for free at https://www.gadunky.com/lithophane-stands/. These are primarily designed for use with the lithophanes available on Gadunky.com, but they will work with any item that fits inside them. They hold the lithophane at an 80° angle for optimal viewing, with the flat section featuring a curve facing towards the back. Print with 100% infill in whatever material and color you prefer; testing has been done with PLA, PETG, and ABS. A layer height of 0.2mm strikes a balance between quality and print time on these. When using a stand, the lithophane's height must also be taken into account. These have been designed to comfortably hold a lithophane that is 1.75 times the length of the stand. So the 180mm version should support a lithophane that stands 315mm tall (180mm + 75%). In practice, it will hold a much taller lithophane than this, but we only recommend up to 1.75 times the length. If you need a particular size, just comment and I'll add them; I require the length of the lithophane, its thickness, and how tall it will be. File name breakdown: LithoStand-Gadunky.com-v3b-3.2mm-200mm.stl v3b: Version 3b of the stand design 3.2mm: For use with 3.2mm thick lithophanes 200mm: For use with 200mm in length (or smaller) lithophanes All files follow this naming format.