Lithophane Stands

prusaprinters

<p>These are mainly for use with the lithophanes available on <strong>Gadunky.com</strong>(but work on anything that will fit in them). They hold the lithophane at an 80° angle for best viewing(the flat section with the curve should be facing the back).</p> <p>Print with 100% infill in whatever material and colour you like(tested with PLA, PETG and ABS). A layer height of 0.2mm is a good balance between quality and print time on these.</p> <p>The height of the lithophane must also be considered when using a stand. These have been designed to comfortably hold a lithophane with a height 1.75x the length of the stand. So the 180mm version should hold a lithophane with a height of 315mm(180mm+75%) without falling over. In practice it will hold a much taller lithophane than this, but we only recommend up to 1.75x the length.</p> <p>If you need a particular size just comment and I'll add them. I need to know the length of the lithophane, thickness and how tall it will be.</p> <p><strong>File name breakdown:-</strong><br/> LithoStand-Gadunky.com-<strong>v3b</strong>-<strong>3.2mm</strong>-<strong>200mm</strong>.stl</p> <p><strong>v3b</strong>: Version 3b of the stand design.<br/> <strong>3.2mm</strong>: For use with 3.2mm thick lithophanes.<br/> <strong>200mm</strong>: For use with 200mm in length (or smaller) lithophanes.<br/> All files follow this naming format.</p> <p>.</p> <h3>Print instructions</h3><p>0.2mm layer height is perfectly fine for these.<br/> 100% infill,</p>