Lithophane Lampe

thingiverse

Here is a 360-degree Lithophane Lamp. Creating a Lithophane: Visit this page: http://3dp.rocks/lithophane/ Upload an image !!!The image should be no more than about 78mm high.!!! I used multiple images, so I created a Word document and inserted the images into it, arranging them in such a way that none of the images exceeded 78mm in height or 300mm in width. Choose "Outer Curve" Settings - Model settings - Maximum size (MM) to 300 mm Settings - Model settings - Thickness to 2mm Settings - Model settings - Curve to 360 degrees Settings > Image settings > positive image, unless it's a negative image Select "Model" from the top menu Press "Refresh" Click "Download" to download the Lithophane. Electronics: White LEDs (e.g. https://bit.ly/2yH6wmI) Slow-changing RGB LEDs (e.g. https://bit.ly/2AeUiUm) 9V Block Battery 9V Block Connector (e.g. https://bit.ly/2RYFsrI) Resistors On/Off/On Switch (6mm Shaft) (e.g. https://bit.ly/2CQn0xh) The LED socket can be used as shown in the picture. Lighting can, of course, be implemented differently. All parts can be printed without support. As this is my first self-designed model using Fusion360, I appreciate any feedback on how I might improve it. The threads fit together perfectly from the start.