Lithophane box

prusaprinters

<p>update: 05.10.2019 added also a 12mm extra version for the bottom legs on request to have space to hide a battery pack.</p> <p>update: 04.10.2019 added 25mm extra to the bottom legs on request to have space to hide a battery pack.</p> <p>The original was impossible to print with all the support needed, so i created a new version where there are 6 individual pieces. only the legs need a tiny amount of support (print these standing with a skirt with a size of 10 outlines to prevent it from falling over or moving too much)</p> <p>i havent got as far as installing any lithophanes and lighting but will do that soon.</p> <p>I have a 140x140x140 bed, so these STL files uploaded will give you a lithophane size of around 113.4mm</p> <p>instructions:</p> <p>1.Turn the cover 180degrees so it lays flat</p> <ol> <li>create 4 sockle_legs print it standing.</li> </ol> <p>you can print it with .3 or .2 and a 30-40% infill</p> <p>only the sockle_legs need support and a skirt of at least 10 outlines</p> <p>if you have a larger printer, you can offcourse scale up everything and measure the distance yourselve.</p> Category: Other