Lipstick Ring Holder
prusaprinters
<p>This object is a ring holder that is designed to look like an open lipstick tube. It consists of three parts, for ease of assembly and the ability to print each part in a different color. One of the lipstick inserts included in the package has a crescent moon inset in it. There is one with no marking, if you prefer that.</p> <p>This object was designed for my wife, who wanted a ring holder for her vanity.</p> <h4>Assembly</h4> <p>All of the parts should have enough tolerance built in to allow for easy assembly. Print all three pieces, slide insert into housing then place onto dish. Glue could be used to permanently affix housing to dish, but leaving the insert free allows for a color swap later if desired!</p> <h4>Dimensional Details</h4> <p>The widest point at the base of the lipstick housing is 15mm. A US size 5 should fit over it. If you need a smaller size, simply scale it down accordingly.</p> <h3>Print instructions</h3><h3>Category: Containers Print Settings</h3> <p><strong>Printer Brand:</strong> FlashForge</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2F3xKW3">Creator Pro</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.1 mm</p> <p><strong>Infill:</strong> Low (< 15%)</p> <p><strong>Notes:</strong></p> <p>Print all components at same scale. Tolerances should allow easy fit. You may desire to glue items together for a permanent fit, but they should hold together.</p>
With this file you will be able to print Lipstick Ring Holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lipstick Ring Holder.