Lipo Case for Eachine 3.7V 1S Batteries

thingiverse

This is a case designed to hold up to ten 1S 3.7V Lipos (including Velcro) as used on the Eachine QX95 micro FPV quad or similar micros. The bottom of the box is divided so you can print one green and the other red, with power chord on the red side indicating empty and green indicating charged. The design consists of two models that I recommend printing separately for a consistent color, the "box" and the "top". For each there is a "SINGLE" file - use this if you don't have a multicolor printer and want to print all in one color. The bottom won't be split then and you'll need to mark the sides with something (marker, paint, sticker) yourself. If you have a Prusa MMU, you can make good use of all 4 colors, printing the inside green and red and the outside with different colors. Use all files which are NOT labeled "SINGLE" to print the multicolored versions. Also check the print settings I've used to mix colors like signal yellow and black and to have the top cover fit on the box neatly with just a slight resistance.