Linear rod limit switch mount
thingiverse
I did not want to drill into my 3018-Pro, so I made limit switch mounts that clip onto the linear roads. There is a clip for the 10mm road used by the X and Y axis, and one for the 8mm road used by the Y axis. The mounts are made to fit the limit switches designed to work with the 3018-ProVER, like [these](https://www.amazon.com/dp/B08P1D6WTR?psc=1&linkCode=sl1&tag=donfbecker-20&linkId=7e973e9a581879b626bb46b9bc71aabb&language=en_US&ref_=as_li_ss_tl). The controller on my 3018-Pro uses 2-pin dupont connectors for limit switches, so I removed the red wire from what was provided, and crimped a dupont connector to the other end of the black and white wire. For the Z axis, desoldered the existing 90 degree pin header, and soldered back on a vertical connector. The screw holes are a bit under 3mm. I was able to just start an M3 screw into them, but I run a 3mm tap through them to be safe.
With this file you will be able to print Linear rod limit switch mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Linear rod limit switch mount.