Lime SDR USB case with fan

Lime SDR USB case with fan

thingiverse

I'm upgrading my Lime SDR with a USB interface, and I've decided to add a fan for optimal performance. The recommended fan by SDR designers is the DigiKey 259-1565-ND model, which I highly recommend. To attach the fan cable, you'll need the body of the connector from DigiKey (H2179-ND) and the contacts from H9992CT-ND. Be aware that the wire might be a bit too large to fit in the connector body, so I used a drop of epoxy as a strain relief to prevent any issues. To secure the fan in place, use half-inch flat head screws, and for the top and bottom of the case, use 7/8-inch screws. It's essential not to over-tighten them, as this can damage the plastic.

Download Model from thingiverse

With this file you will be able to print Lime SDR USB case with fan with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lime SDR USB case with fan.