LilBoi 3" - fully printed CineWhoop

prusaprinters

This CineWhoop model is designed to be printed on a small 10x10x10 build volume printer such as a Monoprice Mini or Turnigy Fabrikator. How it started if you care ;): https://intofpv.com/t-designing-a-fully-printed-cinewhoop Gopro Session mount is a remix of https://www.thingiverse.com/thing:3035118 Parts required: Screws: 4x 20-25mm some 5-8mm I picked what I needed from this set: https://bit.ly/2C4xBm1 (BG) Motors: 1407 motor set: https://bit.ly/2NwZ9pk (BG) Propellers: Best would be to buy larger propellers and cut + sand down for a perfect fit, but for lazy people like me: https://bit.ly/2JL82uq (BG) Flight controller: Betaflight F7 flight controller and BLheli_32 ESC stack: https://bit.ly/326TBqZ (BG) or cheaper F4 FC + Blheli_S stack (I'm using this one) https://bit.ly/2NaFSet (BG) FPV camera: Runcam Swift Micro V3 https://bit.ly/2Nu1scA (BG) HD camera: Runcam 5 https://bit.ly/2oGaf2S (BG) or a GoPro ;) Battery should be sourced locally. Any 650-850 4s pack of decent quality will do: GNB, Tattu, CNHL to name a few. If you want to source from China: https://bit.ly/2NcZj6r (BG) Print Settings Supports: Yes Notes: Print ducts with supports. Infill: going with 100% (or 999999 ceilings?) is probably the best choice. Ducts should be printed in carbon fiber or hard TPU. As I don't have any of those, I printed mine in Spectrum PLA pro (less brittle, more flexible than standard PLA) FPV camera belt should be printed in TPU. You can use it on either side of the quad, flying a reverse or even a quad-camera setup if you wish to. HD camera (work in progress) I left a flat plate for you to design your own solution if you are in a hurry, I will provide some Runcam/Session + Hero 6-8 files in a few days. You can also use the provided camera mount with an ordinary strap to fix a box-shaped camera. Category: R/C Vehicles