Light shade for T10 bulb on Loc Line
prusaprinters
<p>Lamp shade for a T10 LED bulb held in a rubber pre-wired harness connector mounted at the end of Loc-Line (aka "flex pipe") There are many T10 LED bulbs available online, I found (these)[https://www.amazon.com/gp/product/B00JRE38EA/) to be pretty decent. Supplies enough light to show what's printing in a dark room.</p> <p>Has provision in the Loc Line end that you could run the wires through if you were so inclined.</p> <p>I printed in Mika3D silk silver filament which works well enough, although as you can see it's not exactly opaque. Could get fancy and use aluminum foil if you wanted a better reflector.</p> <p>Also pictures is my Loc Line camera mount for the Logitech C910 and a 1/4" NPT adapter for M5 screws which I used to mount these to my Prusa MK3S.</p> <h3>Print instructions</h3><h3>Category: 3D Printer Accessories Summary</h3> <p>Lamp shade for a T10 LED bulb held in a rubber pre-wired harness connector mounted at the end of Loc-Line (aka "flex pipe") There are many T10 LED bulbs available online, I found (these)[https://www.amazon.com/gp/product/B00JRE38EA/) to be pretty decent. Supplies enough light to show what's printing in a dark room.</p> <p>Has provision in the Loc Line end that you could run the wires through if you were so inclined.</p> <p>I printed in Mika3D silk silver filament which works well enough, although as you can see it's not exactly opaque. Could get fancy and use aluminum foil if you wanted a better reflector.</p> <p>Also pictures is my Loc Line camera mount for the Logitech C910 and a 1/4" NPT adapter for M5 screws which I used to mount these to my Prusa MK3S.</p>
With this file you will be able to print Light shade for T10 bulb on Loc Line with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Light shade for T10 bulb on Loc Line.