Life Size Thor's Hammer (Mjölnir) - fixed handle

prusaprinters

<p>This is a remix of ChaosCoreTech's life size Mjölnir (<a href="https://www.thingiverse.com/thing:1311108">https://www.thingiverse.com/thing:1311108</a>).</p> <p>Actually, it's more a make than a remix - I only treat it as a remix because I had to fix two parts of the handle (they were non-manifold, Slic3r didn't like them at all). No actual details were changed, and all other parts of the model are completely unchanged. All parts are included here for convenience.</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution Category: Props Print Settings</h3> <p><strong>Printer:</strong> Prusa i3</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2 mm</p> <p><strong>Infill:</strong> 3 to 20%</p> <p><strong>Notes:</strong></p> <p>The head ("body") was printed with 3% (yes, three percent) rectilinear infill, while the handle was printed with 20% infill, honeycomb pattern. Both were printed with 5 top/bottom solid layers and three perimeters. Atomic "Metallic Silver" PLA, 210°C, 60 mm/sec max speed.</p> <p>Total print time, about 50 hours, and around 220 meters of filament.</p> <p>I used the "solid" head half.</p> <p>The model shown here is printed at full-size, and is displayed on the printer that made it.</p> <p>Other than removing the supports, adding color to the handle (expertly applied with a brown Sharpie :-) ), and some minor scraping and sanding to make everything fit perfectly, no post-processing was done.</p>