License Plate Reindeer Kit

prusaprinters

<p>Make your car festive with our license plate reindeer kit!</p> <p>It uses the same four screws as the license plate to hold the antlers on top and then to hold a bracket on the bottom that the nose screws on to, so it’s pretty simple to install. It works with our <a href="https://livingtesla.com/shop/" target="_blank">SnapPlates</a> for quick installation and removal on Teslas, but also works with the factory plate mount or other aftermarket plate mounts on most any vehicle as long as there’s room around the plate for the nose and antlers without hitting anything.</p> <p>Here's a video with more about it: <a href="https://youtu.be/bjeSzToF6tg">https://youtu.be/bjeSzToF6tg</a></p> <h3>Print instructions</h3><p>Each part has a flat side, so make sure that's down on the print bed. We print at 0.3mm layers with 10% infill and it works fine with PETG. Just use variable layers at the top of the nose to smooth out the lines for best results.</p> <p>For the angled antlers, use one M3-0.5x25mm screw to attach the main part of the antler to the part that connects to the license plate.</p> <p>If there's clearance on your car, you can just print the flat version of the antlers and skip the angled ones.</p>