Lennon by Warhol

cults3d

Tribute to both Andy and John. You'll need three filaments: black, red (or orange), and blue. Use PLA or PET-G, but steer clear of transparent filaments. First, use black filament; change it to red at a height above 1 mm and switch to blue at a height above 2 mm. For a layer height of 0.2 mm, this translates to 1.2 mm and 2.2 mm. Hopefully, your slicer allows for filament changes or pauses at predefined heights. Depending on the filament you're using, there might be some stringing involved. You can try removing it with a heat gun, but be cautious not to deform the thin print in the process. The dimensions of this print come in at approximately 150x150 mm. If you decide to scale it down, make sure to check for lost details before printing in your slicer.