Lego Skeleton Minifigure, 1:1 with Printed Skull Face

thingiverse

This is a 1:1 scale Lego Skeleton featuring Lego compatibility, functioning ball joint arms, and a printed skull face. It's designed to be printable with a standard .4mm nozzle. Please read these notes before use. Included Files: - Skull stl - Torso stl - Arm stl - Left leg stl - Right leg stl (identical to left, but rotated axially 180 degrees) - Full skeleton stl - Stock Creality Ender 3 Pro Full Skeleton GCode The print shown in the images was done using the included Gcode on a stock Creality Ender 3 Pro with the stock .4mm nozzle and .06mm layer height at 100% infill. GCODE NOTES: Programmed specifically for use on the Creality Ender 3 Pro. Other printers may not be supported. Use at your own risk. Be advised, gcode uses 215C nozzle temp and 63C build plate temp for the filament I used, you may need to tune your machine on the fly for your filament. Printed directly on the magnetic build plate. First layer prints at .06mm height. Print time 1 hour 45 mins. Slicer Setting Recommendations: - Support structures: touch the build plate only. - Ensure first layers print at .06mm increments for best surface finish. Printer Setting Recommendations: - Reduce speed of first 2 layers to 25% of nominal for smooth finish on back of torso and bottom of skull Other Notes: - Supports for ball joint socket of arms can be carefully trimmed with nippers - This project is a compilation of models produced by others as well as my own. Not intended for commercial use or resale. - Silver filament makes it look like the Terminator - Patience is a virtue HAPPY PRINTING!