LEGO-compatible 45 Degree Wall Mounts

prusaprinters

<p>These mounts are for displaying your LEGO models on the wall! I designed them for my LEGO car models, but they could be used with any LEGO model.&nbsp;</p><p>They're designed to be hung on <a href="https://www.amazon.com/Hangman-Double-Headed-Bear-Claw-Hangers/dp/B002NEFF92">Bear Claw</a> style hangars, but a normal screw would work as well. The mounting hole is a keyhole style mount with a ramp to hold tightly onto the head of the hangar.&nbsp;</p><p>I've provided three sizes. I used the 4x12 without an offset for my F40 model, and the 4x12 with the offset (130mm total length) for the Porsche 911 model. The offset was needed for the 911 because without it the lugs of the mount interfered with the model. On the F40 I used a few plates to lift the car up from the mount. They've been sitting on these mounts for about 8 months without the models coming loose or falling down, so if your printed lugs snap onto your model nicely, I feel confident that they'll stay up.&nbsp;</p><p>I've included a 2x4 test piece to print as a check that your prints will come out well. It should give you a good idea of how the lugs will print out on your machine. These were all printed in PETG with a 0.6mm nozzle. I would recommend using a thick layer height and wall thickness, as the mounts aren't visible, and you will want them to be as strong as possible.&nbsp;</p><p>Hopefully this can help you get your LEGO model looking good on the wall!</p>