Lee APP Base v7

prusaprinters

Lee APP Base v7 has a box for miscellanies parts and spots for die tool, bullet tubes, primer catcher and five shell plates as well as on optional bin holder. If you have your APP on an Inline Fabrication quick mount plate, it makes the whole thing self contained and easy to store.How to print:- Print the Tool holder and Footing together. Place the Footing in opening for it on the Tool holder. Set the fill for the footing to at least 40% and walls at 6 and the Tool holder seems fine at 15 to 20%. You may need to toggle an “objects” setting in your slicer to treat them separately. This ensures the base isn't compressed by the press. If you can't set separate - The Bin holder should be printed standing up on it's side so it has strength in the proper direction. - The Lid can be printed flat, largest side down.Parts needed:- To attach the Bin holder you will need 4 x M4x8 counter sink screws. Mine came from this set but you can get these at most hardware stores- Not required but the Lid can use a 3x4mm ball plunger to keep it in place when moving it around.