LED strip housing

thingiverse

This is a housing for an LED light strip. I designed it with 2835 in mind, but I made it wide enough to fit any size LED strip. Double-sided tape on the bottom makes it easy to attach under a shelf and focus the light in one direction. White filament works best for reflection, but I used black so the housing blends in with a dark shelf. I hope you like it. These display lighting kits are available at my store: https://www.etsy.com/listing/734763620/display-lighting-kit INSTRUCTIONS This project requires some assembly. Usually, I print two v3-led-housing.stl, two v3-end-cap.stl, and one v3-adjoining-cap.stl files. Once they're printed, you can assemble the housing by sliding the two pieces into each end of the adjoining cap and attaching the end caps. Run a strip of 2835 LEDs down the center (sometimes I double it up) and connect it to some wiring that can be purchased on Amazon. I've listed some necessary parts below. I designed the end caps and adjoining cap with an arched shape so you can add plastic shielding, which can also be found on Amazon. You'll need to purchase all the required components to assemble this project. When assembly is complete, glue everything together for a more secure fit. Glue the LEDs in place, as well as the individual pieces of housing. I used 24-volt LEDs for this design, so make sure to get the right voltage when purchasing your parts. Here are some necessary supplies: * 24v power supply: https://www.amazon.com/ALITOVE-100-240V-Adapter-Converter-5-5x2-1mm/dp/B01GC6VS8I * 24v LEDs: https://www.amazon.com/ALITOVE-Waterproof-Daylight-Under-Cabinet-Decoration/dp/B07PWVD357 * LED connectors: https://www.amazon.com/iCreating-Connector-Pigtail-Flexible-Solderless/dp/B06XJJMKKH * Dupont pin connectors: https://www.amazon.com/KINCREA-Housing-Connector-Adaptor-Assortment/dp/B07DF9BJKH * Pin connector crimping tool: https://www.amazon.com/IWISS-Terminal-0-1-1-0mm-AWG28-18-connector/dp/B017JU20Z6 * Extra wire: https://www.amazon.com/dp/B00QTCBZ4I