LED Power Supply Mount for Misumi 2020 extrusion

thingiverse

This is a part that fits what I believe is a standard LED power supply. Mine has two sets of 3mm holes on the side spaced 25mm on center apart. That makes the socket head cap screws I used interfere with the 2020 extrusion so I created the part to have the heads countersunk. The part isn't 100% symmetric because the power supply isn't, but I probably should have just left it symmetric because it's not noticeable and slightly throws off the angle of the power supply compared to the extrusion (probably less than 1 degree). It's designed for 3mm socket head cap screws, two were about M3 x 8 or 10, the other was M3 x 35 and has a nyloc nut securing it. The long screw didn't turn out to be necessary since the part fits pretty tightly on the extrusion, but I put it there on the odd chance I want to transport my printer in a rough way. Printer Settings Eclips3D Printer (CoreXY) No Rafts No Resolution .34mm layer height Infill 20-30% Notes I printed this in ESun natural PETG for strength and so it's not brittle like PLA gets. But anything would probably work. The holes are slightly oversized to allow for some screw movement/misalignment and printer issues, but may still require post-print cleanup. Print two for a single power supply. Could be used for other things too presumably.