LED Mount Ender 2 / CR10 Mini / CR10 / With Cover

thingiverse

Edit* Updated - Added a cover shade for the CR10. With two rows of LEDs, light was extremely bright and bothered my eyes, so I made a cover. Printed this in just white PLA straight to glass to get a smooth surface. Same dimensions as the LED mount. Just super glued in place; will add an Ender 2 Cover soon. This is a mount for LED Light strips. These mounts are designed to attach on the opposite side of the 20x20mm extrusion on Creality printers. The smaller 125mm O.A.L. is for the Creality Ender 2, and the longer one is for a CR10 Mini, which is 225mm long. It should fit a CR10 if the bed width is also 300mm. I simply used sticky tape on the back of the LED to attach two strips of lights to it. I first sanded it to roughen up its surface as the glass left it smooth. The brackets have a 3mm hole, and can be mounted via T-nut / hammer nut. I also added a couple of slots to snake the wires through; I used it as a spot to add hot glue. Printed with: Need to rotate part 45 degrees from the ThingyView. Like I have in Cura as an example. No support 10-15% infill .2 layer thickness 60mm feed rate The top brackets start to curl slightly, so you can manually adjust speed down to about 35mm/s or slow it down for those layers in S3d. The first one I did is fine; just looks a little sad.