LED LightBar

prusaprinters

LightBarI designed this to have some portable light for soldering, photography, etc. This bar runw on WLED. Shopping ListMini360 Step-Down converterESP32-C3 SuperminiUSB-C-PD trigger boardFCOB LED Strip (Choose 12v and I'd recommend choosing 528 Leds)WS2815 60/m (please choose IP30 and make sure to select WS2815)TIP122F*4 Heatset Inserts M3x6x5* ("M3(OD 5mm)" and “Length 6mm 30pcs”)2x Machine Screws M3x25* (Choose the right one!)2x Machine Screws M3x10* (Choose the right one!)Some cables (ofc)*All links are affiliatelinks with a * on them are the ones I sourced differently, not from AliExpress. Printing InstructionsThe files are all correctly oriented, so I'd recommend importing them as projects, so the preplaced supports are there (only important for Bottom Cap). All parts can be printed with normal settings, except the diffusor.DiffusorPrint at 0.2mm layer height (first layer as well!) with, I'd recommend White PETG, as PETG seems to be a bit more translucent than other plastics, but try experimenting around.  AssemblyAt first, insert the heatset inserts into the base part, both at the bottom and top.Make sure to flash the esp32 with WLED before assembly and, most importantly,SET THE STEP-DOWN CONVERTER TO 5V!!!Solder everything together (don't forget resistors on the data line and in front of the transistor!) and shove everything into the base, after pressing the USB-PD board into place as well.Assemble the rest! For anyone interested in the .STEP file, it can be obtained over at my Ko-Fi shop.